AdSense Auto Ads vs Manual Ad Units: Which to Use
What Auto ads actually does
With Auto ads, Google decides where ads go on each page, within the formats you allow. You paste one AdSense snippet into the head of every page, switch formats on or off in your account, and Google finds spots for ads as each page loads. You write no ad slot markup.
Manually placed ad units work the other way round. You create an ad unit in AdSense, paste its code into a specific spot in your template, and that's where the ad shows. Nothing moves unless you move it.
Auto ads is fast and gives you overlay formats you can't build by hand. Manual units give you control over layout and stability. Most sites end up with a mix, and this post is about choosing it. For general advice on where ads earn best on a page (above the fold, in-content, sidebars), that's covered in our ad placement best practices guide, so it isn't repeated here.
The formats Auto ads can use
Google's About Auto ads page groups the formats into three families. The names have shifted over the years (older guides talk about "in-page ads" and "matched content"), so here's how they're labelled in AdSense Help now:
- In-page formats: banner ads, which Auto ads inserts into your main content, and multiplex ads, a grid of native-style ads that usually appears near the end of an article.
- Overlay formats: anchor ads (a bar stuck to the top or bottom of the screen), vignette ads (full-screen ads shown at a transition, such as moving between pages) and side rails (ads in the empty margins on wide desktop screens). Google describes these as sitting over your content without changing its layout.
- Intent-driven formats: ad intents, which turn existing words on your page into links, anchors or chips that open ads related to that topic.
Each one carries a different kind of risk for your readers, and that should decide whether you leave it on.
Auto ads formats at a glance
| Format | Where it appears | UX risk | Tip |
|---|---|---|---|
| Banner ads (in-page) | Inserted between blocks of your content | Medium: can push text down as it loads | Use excluded areas to keep them out of headers, tables and tools |
| Multiplex | Native-style grid, usually lower on the page | Low to medium: can be confused with your own related posts | Check it doesn't sit right next to your own "related articles" block |
| Anchor | Fixed bar at the top or bottom of the screen | Low to medium: covers part of the viewport | Check it doesn't cover a cookie banner, sticky nav or chat button |
| Vignette | Full screen, at transitions | High if frequent: interrupts reading | Set the frequency cap and review the extra triggers |
| Side rails | Empty side margins on wide desktop screens | Low: uses unused space | Only shows where there's room, so judge it on desktop numbers |
| Ad intents | Inside your existing text | Medium: links look like your own links | Test on how-to and reference pages where readers click a lot |
The controls you actually have
The controls changed in 2026, so older tutorials may describe settings you won't find.
The ad load slider is gone
For years, Auto ads had a single "ad load" slider that let you trade more ads for a lighter page. In March 2026, Google announced on its advanced settings for Auto ads banner ads page that it was removing the slider, with the change scheduled for April 16, 2026. What replaces it, under in-page formats, is a set of banner ad "advanced settings":
- Maximum number of ads on a page: a hard cap on in-page ads.
- Minimum distance between ads on a page: how much space Auto ads must leave between in-page ads.
- Find more ad placements on article pages: lets Auto ads look for extra spots on article-style pages. Google notes this doesn't automatically mean more ads, because the cap and spacing still apply.
Google says old slider values were migrated to approximate settings that may not match exactly. If you set up Auto ads before April 2026, open these settings and check what you now have.
Format toggles
Every format above can be switched on or off in your Auto ads settings, per site. This is your bluntest and most useful tool. If you hate how vignettes feel on your recipe site, turn them off. You don't have to accept the whole bundle.
Vignette frequency and triggers
Under overlay formats, vignette ads have their own advanced settings. You can set a minimum time between vignettes for the same visitor. There's also a setting called "Allow additional triggers for vignette ads". According to Google's About vignette ads page, it lets vignettes appear at moments other than moving between pages, such as when a reader comes back to a tab, reaches the end of an article and lingers, or returns after a period of inactivity. It's on by default when vignettes are on. If your readers often switch tabs, think about whether you want an ad greeting them each time they return.
Excluded areas
Excluded areas let you mark sections of a page, such as a header, a comparison table or a calculator, where in-page Auto ads must not appear. Two details from Google's excluded areas page matter in practice. First, they only apply to in-page Auto ads. Excluding the top of a page won't stop an anchor ad from appearing there. Second, they're defined using CSS selectors, so if a theme update renames the element's class or ID, the exclusion can silently stop working. Recheck them after redesigns.
Page exclusions
Page exclusions turn Auto ads off for a specific URL or for everything under a URL prefix, such as a whole /tools/ section. Use them for pages where ads don't belong: contact, checkout, login and tool pages. Ad units you placed by hand are separate code, so remove those yourself if you want a page fully ad-free.
When manual ad units are the better choice
Auto ads decides placements by itself, which is its strength and its weakness. Manual units win in a few specific situations.
When layout stability matters
Cumulative Layout Shift (CLS) measures how much visible content jumps around as a page loads. Google's "good" mark is 0.1 or less at the 75th percentile of real visits. In-page ads are a classic cause of shifts: an ad slot with no reserved height collapses to zero, then expands when the creative arrives, pushing your paragraph down mid-sentence.
With a manual unit, you decide where the slot is before the page renders, so you can reserve space for it with CSS, for example a container with a min-height that fits the ad sizes you expect. The page lays out once and stays put, even if the ad arrives late or doesn't fill. With in-page Auto ads, the placement is chosen on the fly, so you can't reserve space in advance in the same way. Google doesn't publish exactly how Auto ads limits shifts. If your field CLS got worse after enabling in-page formats, that's a reason to move those positions to manual units rather than a reason to give up on ads. The speed side of this is covered in detail in why your site slows down after adding ads.
When a placement has to be exact
Some positions only make sense on certain templates: after a recipe's ingredient list, or under a results table. Auto ads doesn't know your page's meaning and might put an ad between a question and its answer. If a spot matters, code it.
When you need to keep ads away from things
Excluded areas are a blocklist. Manual-only is an allowlist: ads appear only where you put them. That's safer near forms, tools and buttons where AdSense's rules on accidental clicks come into play. The AdSense approval guide covers what reviewers look at.
Manual units also report individually in AdSense, so you can see which position earns. Auto ads reports by format, not by spot.
When Auto ads is the better choice
Auto ads is usually the better starting point when:
- You have many templates and no time to hand-place ads on each.
- You want anchor, vignette or side rail ads, which come through Auto ads rather than a standard display unit.
- You're new to AdSense and don't yet know which positions work.
- Your CMS makes body code awkward but a single head snippet easy.
Using both together
You don't have to choose. A common, sensible setup is: manual units in the two or three positions you care most about (with reserved space), overlay formats from Auto ads for extra income that doesn't move your layout, and in-page Auto ads either switched off or limited with a low maximum number of ads and generous spacing.
The AdSense code is the same snippet for both, so you load it once in the head and add the unit markup where you want manual slots. Auto ads then works around what's already on the page. Watch the total ad count on long pages (manual plus Auto ads). Also look at "Allow Google to optimize existing ads" in the banner ad advanced settings: Google says it optimizes your existing units and Auto ads together but doesn't publish exactly what it changes, so compare your layout with it on and off.
Auto, manual or both?
- Is your field CLS already good?If not, fix it with manual, space-reserved units before adding in-page Auto ads
- Do you have a few must-have positions?Code those as manual units with reserved height
- Do you want extra income without moving layout?Turn on anchor and side rails; add vignettes with a frequency cap
- Do you have many templates you can't hand-tune?Allow in-page Auto ads with a low cap and wide spacing
- Protect what must stay ad-freeExcluded areas for sections, page exclusions for whole URLs
- Measure for a few weeks, then adjust one thing at a timeRevenue per session, CLS and engagement, not page RPM alone
How to judge the results
More formats usually means more impressions, so "earnings went up" on its own doesn't tell you much.
Page RPM vs revenue per session
Page RPM is earnings per 1,000 pageviews. It's useful, but it hides a trade-off: if aggressive ads make readers view fewer pages, page RPM can rise while total revenue from each visit falls. A vignette that fires between pages is the textbook case. It earns on the pageview where it appears, and might also cost you the next pageview.
Revenue per session gets closer to the truth. AdSense doesn't report sessions itself, so divide AdSense earnings by sessions from your analytics tool for the same date range and the same pages. Here's a hypothetical: say page RPM goes up after you add vignettes, but pages per session drop. Earnings per session could come out flat or even lower. That's a change to roll back, even though one dashboard says it's working. For the wider picture of what moves RPM, see how to maximize ad RPM.
Watch CLS in field data, not the lab
Lab tools like Lighthouse often load pages without real ads filling, so they can miss ad-driven shifts entirely. Use field data: the Core Web Vitals report in Search Console, or the field section of PageSpeed Insights. Field data covers a rolling 28-day window, so give any change a few weeks before you judge it.
Use Google's own experiments
When you set up or change Auto ads, AdSense offers the option to run an experiment instead of applying the change straight away. Google's setup guide describes it as testing Auto ads on part of your traffic, and the reported results cover your whole site, including any manual units. Both groups see the same days and advertiser demand, which makes it a fairer comparison than before-and-after.
Check what readers see
Open your top pages on a mid-range phone. Scroll a full article, count ads, note anything covering buttons or text, and switch tabs to see when a vignette appears. No report will tell you the anchor ad covers your signup button.
A sensible way to start this week
If you already run Auto ads with everything switched on: open your Auto ads settings, check the banner ad advanced settings that replaced the old slider, set a vignette frequency you'd tolerate yourself, and add page exclusions for any tools or forms. Then pick the one position on your most-visited template that matters most and turn it into a manual unit with reserved height.
If you only use manual units: try enabling anchor ads and side rails alone through an AdSense experiment. They don't touch your layout, so they're the lowest-risk way to find out whether Auto ads adds anything for your audience.
Either way, write down your revenue per session and field CLS before changing anything. If you're still working toward approval, run the AdSense readiness check first.
We build AdGateScore, the ad network readiness scanner. Our articles draw on the requirements each network publishes and on what our scans find.