What "Made for Advertising" Actually Means
If you sell ads programmatically, there's a label you really don't want buyers putting on your site: MFA, short for "made for advertising." It describes a site that exists mainly to sell ad impressions, not to serve readers. The content is a pretext. The real product is the ad slot, and the traffic is often bought cheaply so the site can resell it at a higher price.
The term isn't new. Ad buyers have grumbled about arbitrage sites for years. What changed is that MFA went from trade-desk slang to a line item in brand budgets. Once that happened, advertisers, agencies and demand-side platforms (DSPs) started blocking it on purpose, and the blocking isn't always precise. A legitimate site with a few bad habits can end up on the wrong side of a filter.
This post covers where the term came from, the traits buyers look for, how they detect them, and what you can do so your site never gets mistaken for one.
How the ANA Study Made MFA Mainstream
In 2023 the Association of National Advertisers (ANA), the US trade body for big brand advertisers, published its Programmatic Media Supply Chain Transparency Study. The ANA and its research partners followed real campaign spend from the advertiser through the chain of DSPs, exchanges and supply-side platforms (SSPs) all the way to the sites where ads actually ran.
One of the findings that got the most attention was about MFA. The study reported that a meaningful share of open-web programmatic impressions, and a smaller but still significant share of spend, landed on sites that fit an MFA profile. It also found that campaigns were spread across a very long tail of websites, far more than most marketers assumed they were buying. The exact figures are in the ANA's report, and they're worth reading at the source rather than secondhand.
The study mattered less for its numbers than for what it did to the conversation. Advertisers who'd never heard the phrase "made for advertising" were suddenly asking their agencies how much of their money was going to it. Agencies asked their DSPs. DSPs and verification companies responded with MFA lists, MFA categories and pre-built blocking options. Within a short time, avoiding MFA became a default setting in a lot of buying, not a special request.
For you as a publisher, the practical result is simple: if a buyer's systems classify your site as MFA, some demand disappears. You won't get an email about it. Bids just get thinner, and you may only notice it as a slow drop in RPM.
The Traits Buyers Associate With MFA
There's no single official, universally accepted definition. Different vendors weigh things differently and don't publish their exact formulas. But the traits described around the ANA study, and the ones vendors talk about, overlap heavily. Most come down to a site being designed around ad inventory first.
High ad-to-content ratio
The page is mostly ads. You scroll and hit an ad, a paragraph, another ad, a two-line paragraph, a sticky unit, an in-content video player. The reader has to work to find the content. This is the trait most people picture when they hear MFA.
Aggressive ad refresh
Ad refresh means reloading an ad slot with a new ad while the page stays open. Done sensibly, it's a normal practice that many managed ad networks use. Done aggressively, it turns one visit into a large number of impressions that nobody really looks at. Buyers see it as paying for impressions with little chance of being noticed.
Lots of ad slots per page
Closely related to ad density, but distinct. A long page can carry several ads and still be reasonable. A short page with a dozen slots isn't. Buyers look at how many impressions each pageview produces, not only at how the page looks.
Paid traffic arbitrage
This is the business model at the heart of most MFA sites. The site buys clicks cheaply, often from native ad widgets or social ads, sends them to a page packed with ads, and sells those impressions for more than the click cost. The visitors didn't come looking for the site, so they don't stay or engage. They're there long enough to generate impressions.
Slideshows and forced pagination
"20 Celebrities Who Look Nothing Like Their Younger Selves," one image per page, a full set of ads on each page. Splitting a single article into many pages multiplies pageviews and impressions without adding anything for the reader. It's one of the most recognizable MFA patterns.
Thin or templated content
Short, generic, interchangeable articles that exist to hold ads. Often they're mass-produced, lightly rewritten from elsewhere, or built on the same template across many sister sites. If the content could be swapped for any other content without anyone noticing, buyers notice.
None of these traits on its own makes a site MFA. Plenty of good sites refresh ads, run several units on long articles, or buy some traffic to grow. The problem is the combination, and the degree.
MFA trait vs healthy alternative
| MFA pattern | What a healthy site does instead |
|---|---|
| Ads outweigh content on screen | Content leads; ads sit between natural breaks |
| Fast, constant ad refresh | Refresh only in view, after a sensible interval, or not at all |
| Many slots on short pages | Ad count scales with article length |
| Most visits bought from ad widgets | Mostly search, direct, social and referral visits |
| Slideshows split into many pages | One page per article, galleries optional |
| Thin, templated articles | Original, specific content people return for |
| Messy or unknown seller paths | Clean ads.txt matched by sellers.json entries |
How Buyers Detect MFA
Buyers don't usually review your site by hand. Detection happens in bulk, through data that gets passed around the supply chain or measured on the page.
Lists and categories
The simplest tool is a list. Some agencies and DSPs maintain their own MFA exclusion lists, and third-party data and verification companies sell MFA classifications that buyers can switch on. When a buyer applies one of these, every site on it gets excluded from that campaign. Lists get updated, but they also lag. A site that cleans up its act may stay listed for a while, and a site that slips into bad habits may not appear right away.
Ad density and refresh signals
Verification tags and buyer-side measurement can see how many ads load on a page, how much of the screen they take up, how long they stay in view, and how often slots reload. A site that serves a lot of impressions per pageview, with low viewable time per ad, starts to look like it's built for volume.
Traffic source analysis
Some vendors look at where a site's visitors come from. A large share of visits arriving from paid sources, especially native ad networks and click-buying platforms, is a strong signal of arbitrage. Short sessions, many pageviews per visit driven by pagination, and weak return visits add to the picture.
Supply chain data
Buyers also check whether the path from your site to their DSP makes sense. Your ads.txt file says who's authorized to sell your inventory. SSPs publish sellers.json files that say who their sellers are. When those don't line up, or when your inventory is resold through many layers of intermediaries, it looks less trustworthy, whether or not the site is MFA. Our ads.txt guide walks through how those files fit together.
The key thing to understand is that you're being judged by signals, not intent. Your site might be a genuine passion project, but if its numbers look like an arbitrage operation's, the filters treat it like one.
What Google Says About Ads and Content
Google doesn't use "MFA" as a policy term, but several of its rules aim at the same behavior. The AdSense Program policies cover things like invalid traffic, ad behavior and site behavior, and Google's publisher policies don't allow Google-served ads on pages where ads or paid promotional material outweigh your own content. AdSense also doesn't allow you to refresh its ad units on your own without a user action, so the refresh games MFA sites play aren't available to you there anyway.
Separately, the Coalition for Better Ads, an industry group that Google's Chrome ad filtering relies on, lists ad density above 30% of the main content on mobile as one of the experiences that fall below its Better Ads Standards. That's one of the few published numbers in this area, and it's a ceiling for "unacceptable," not a target.
If an approval has already been refused for content or ad-heavy pages, the rejection decoder can help you map Google's wording to what it's likely pointing at, and our post on content quality and ad approval covers the content side in more depth.
How a Real Publisher Stays Clear of the Label
Most of this is just running a good site, but it helps to see each habit through a buyer's eyes.
Keep ad density proportional
Let article length decide how many ads a page carries. A 2,000-word guide can hold more in-content units than a 400-word news brief. Put ads at natural breaks between sections, not between every paragraph, and avoid stacking a sticky footer, a sticky sidebar and an in-content video on the same short page. Check it on a phone, where density problems are most obvious. Our ad placement guide covers specific layouts.
Refresh with restraint, or not at all
If your ad network supports refresh, keep it tied to real attention: only refresh slots that are in view, only after a reasonable delay, and only when the tab is active. Many managed networks set these rules for you. If you're on AdSense, don't try to build refresh yourself.
Watch your traffic mix
Buying some traffic to promote a good article isn't a crime. Building your whole audience on cheap paid clicks is the MFA business model. Aim for most of your visits to come from search, direct visits, newsletters, social and referrals. Keep an eye on the paid share in your analytics, and if you run paid campaigns, make sure the landing pages are your best content, not your most ad-heavy pages.
Drop slideshows built for pageviews
If you have galleries or listicles split across many pages, consolidate them onto one page. You'll lose some pageviews and impressions per visit, but per-impression value often matters more to buyers than raw volume, and the reader experience improves straight away.
Publish things people would miss
The surest defense is content that obviously isn't a pretext: original reporting, real expertise, useful tools, specific advice. It shows up in engagement signals buyers can measure, like longer time on page and return visits, and it's what ad networks review for at approval time anyway.
Keep ads.txt and sellers.json clean
List only the partners you actually work with, remove old entries when you leave a network, and make sure each line matches what the SSP expects. A short, accurate ads.txt is better than a long one copied from a template. If you're thinking about moving to a different network, our switching guide covers the ads.txt clean-up that should come with it.
How buyers read three key signals
A Hypothetical Example
Picture two recipe sites with similar traffic. Site A gets most of its visits from search and Pinterest, runs a handful of ads spaced through each long recipe post, and doesn't refresh. Site B buys most of its traffic from native ad widgets, splits each recipe into a ten-page slideshow, and refreshes every slot frequently.
Site B may well produce more impressions per visitor. But once buyers switch on MFA filtering, a growing share of the demand that would have bid on Site B's inventory simply won't. Site A sells fewer impressions, but each one is worth more and stays available to the buyers that pay the most. That's the trade the whole MFA debate comes down to: volume versus trust.
Where This Leaves You
MFA blocking isn't going away. Brand advertisers now expect it, and the tooling is built into the buying platforms they use. The good news is that the things that keep you off MFA lists are the same things that get you approved by better ad networks and earn higher RPMs: proportionate ads, real audiences and content worth reading. Our post on maximizing RPM goes further into the revenue side.
If you'd like a quick outside check, run your site through AdGateScore. It scans your pages for content, performance, policy, architecture and traffic signals and shows how ready you look to each of the networks it covers. Then pick the one habit from the scale above where you're furthest right, and fix that one first.
We build AdGateScore, the ad network readiness scanner. Our articles draw on the requirements each network publishes and on what our scans find.